Plasma and Fusion Research

Volume 14, 3405050 (2019)

Regular Articles

A New Divertor System Using Fusible Metal Pebbles
Takeru OHGO1), Takuya GOTO1,2) and Junichi MIYAZAWA1,2)
1)
The Graduate University for Advanced Studies, 322-6 Oroshi, Toki, Gifu 509-5292, Japan
2)
National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292, Japan
(Received 8 January 2019 / Accepted 28 May 2019 / Published 24 July 2019)

Abstract

A fusible metal pebble divertor system named the REVOLVER-D2 is newly proposed here, based on the molten tin jet divertor REVOLVER-D and the pebble divertor concepts. In the REVOLVER-D2, solid tin pebble flows are used as the divertor target. Molten tin pools receive the falling tin pebbles to mitigate the impact of the heavy metal shower. All pebbles are melted in the molten tin pool and recycled into the tin pebbles again. The solid tin pebbles are formed inside the vacuum vessel by the shot tower method using silicone oil pools. This concept enables simultaneous achievement of a high heat load tolerance and a high evacuation efficiency, while mitigating the MHD effects. A high heat load can be removed by the pebble flow if the pebble size is large enough and the velocity is fast enough as with the molten tin jet. Although the charge up of pebbles affects the pebble motion due to the Lorentz force and the Coulomb force, the Lorentz force is negligible if the injection velocity is fast enough. For example, center-to-center pebble distance due to the Coulomb force will be ∼ 4 mm in the case of the injection velocity of 10 m/s if the molten tin pool is placed 2 m under the point where pebbles enter the ergodic layer.

Keywords

divertor, liquid metal, fusible metal, pebble divertor, conceptual design

DOI: 10.1585/pfr.14.3405050

Full Text

PDF format (841Kbytes) PDF Download

References

  • [1] J. Schlosser et al., Nucl. Fusion 45, 512 (2005).
  • [2] R.W. Moir, Part. Accel. 37, 467 (1992).
  • [3] S. Mirnov, J. Nucl. Mater. 390, 876 (2009).
  • [4] G. Mazzitelli et al., Fusion Eng. Des. 86, 580 (2011).
  • [5] F.L. Tabarés et al., J. Nucl. Mater. 463, 1142 (2015).
  • [6] T. Okui et al., Fusion Eng. Des. 61-62, 203 (2002).
  • [7] M. Isobe et al., Nucl. Fusion 40, 327 (2000).
  • [8] N. Gierse et al., Nucl. Mater. Energy 2, 12 (2015).
  • [9] J. Miyazawa et al., Fusion Eng. Des. 125, 227 (2017).
  • [10] J. Miyazawa et al., Maintainability of the helical reactor FFHR-cl equipped with the liquid metal divertor and cartridge-type blankets, Fusion Eng. Des. 136, 1278 (2018).
  • [11] M. Kondo and Y. Nakajima, Fusion Eng. Des. 88, 2556 (2013).
  • [12] P.J. Smith, Chemistry of TIN, Springer Science+Business Media B.V (1998).
  • [13] S. Masuzaki et al., Nucl. Fusion 42, 750 (2002).
  • [14] M. Shoji et al., Fusion Sci. Tech. 58, 208 (2010).
  • [15] J. Miyazawa et al., Fusion Sci. Technol. 58, 200 (2010).
  • [16] S.V. Mirnov, J. Nucl. Mater. 196-198, 45 (1992).
  • [17] T. Okui et al., Fusion Sci. Technol. 39, 934 (2001).
  • [18] P.C. Stangeby and G.M.McCracken, Nucl. Fusion 30, 1256 (1990).